p2

Product

Standard Fitting

Push-In Pneumatic Bulkhead Female Connector

Introduction:

Material: Stainless Steel / Brass / Carbon Steel / Titanium

Finish Treatment: Nickel Plated / Zinc Plated

view:217

Description:

Push-In Pneumatic Bulkhead Female Connector Specsheet
Tube O.D.
Ø
JIS B0203, ISO7/1
Tapper Thread
Panel Hole Size
ØT
Dimensions H h
Ø E I L
6.00 1/4" 14.50 4.00 22.25 37.25 17.00 17.00
8.00 1/4" 16.50 6.00 23.85 38.85 19.00 19.00

*Unless Otherwise Specified All Dimensions in Millimeter.
*This item isn’t in normal stock and needs to be produced per request.
*Customized size not in above table is acceptable
*ISO/JIS Tapper, NPT, Metric thread could be customized

 

BSPT (ISO7/1 / JIS B0203)
Dash Size Inch Size Nominal Thread Size Male Thread O.D. Female Thread I.D.
-2 1/8" 1 / 8 – 28 3/8 (0.38") 11/32 (0.35")
-4 1/4" 1 / 4 – 19 33/64 (0.52") 15/32 (0.47")
-6 3/8" 3 / 8 – 19 21/32 (0.65") 19/32 (0.60")
-8 1/2" 1 / 2 – 14 13/16 (0.82") 3/4 (0.75")
-10 5/8" 5 / 8 – 14 7/8 (0.88") 13/16 (0.80")
-12 3/4" 3 / 4 – 14 1 1/32 (1.04") 31/32 (0.97")
-16 1" 1 – 11 1 5/16 (1.30") 1 7/32 (1.22")
-20 1 1/4" 1 1/4 – 11 1 21/32 (1.65") 1 9/16 (1.56")

 

NPT
Dash Size Inch Size Nominal Thread Size Male Thread O.D. Female Thread I.D.
-2 1/8" 1 / 8 – 27 13/32 (0.41") 3/8 (0.38")
-4 1/4" 1 / 4 – 18 17/32 (0.54") 1/2 (0.49")
-6 3/8" 3 / 8 – 18 11/16 (0.68") 5/8 (0.63")
-8 1/2" 1 / 2 – 14 27/32 (0.84") 25/32 (0.77")
-12 3/4" 3 / 4 – 14 1 1/16 (1.05") 1 (0.98")
-16 1" 1 – 11 1/2 1 5/16 (1.32") 1 1/4 (1.24")
-20 1 1/4" 1 1/4 – 11 1/2 1 21/32 (1.66") 1 19/32 (1.58")

 

Metric
Thread Callout Thread Pitch (mm) Male Thread O.D (mm) Female Thread I.D (mm)
M8 X 1.0 1.0 8 6.9
M10 X 1.0 1.0 10 8.9
M10 X 1.5 1.5 10 8.4
M12 X 1.0 1 12 10.9
M12 X 1.5 1.5 12 10.4
M14 X 1.5 1.5 14 12.4
M16 X 1.5 1.5 16 14.4
M18 X 1.5 1.5 18 16.4
M20 X 1.5 1.5 20 18.4
M22 X 1.5 1.5 22 20.4
M24 X 1.5 1.5 24 22.4
M26 X 1.5 1.5 26 24.4
M27 X 2.0 2 27 24.8
M30 X 2.0 2 30 27.8
M33 X 2.0 2 33 30.8
M36 X 2.0 2 36 33.8